Dr. Ismaila Olanrewaju ALABI
Senior Lecturer
Department of Mechanical Engineering
Senior Lecturer
Department of Mechanical Engineering
I. O. Alabi, A. P. Okediji, O. I. Joseph, A. O. Oyefolahan and M. O. Kareem (2026). Performance Assessment Of Selected Eco-Friendly Oils In Turning Operations Of Plain Carbon Steel Nigerian Journal of Technology (NIJOTECH) , Vol. 45 No. 3 , 446 - 457 10.67358/njt.2026.6806
Olukokun T. and Alabi, I. O. (2026). Digital Twin-Enabled State-of-Health Prognosis for Second-Life Electric Vehicle Batteries in Affordable Energy Storage Systems for Emerging Economies Adeleke University Journal of Engineering and Technology (AUJET) , Vol. 9, No. 1 , 177-194.
Okediji A. P., Alabi, I. O., Oloruntoba, O. A., and Ogungbuji S. (2026). Investigation of Reynolds Number Effects on the Mean Flow Characteristics of an Equilateral Triangular Jet Adeleke University Journal of Engineering and Technology (AUJET) , Vol. 9, No. 1 , 165-176
Alabi I. O., Osekita A. E., Samson S. A. and Okediji A. P. (2025). Design and Validation of a Laboratory-Scale Forced Convection Heat Transfer Apparatus Proceedings of the 1st International Conference of Faculty of Engineering and Environmental Sciences 2025, Elizade University Ilara-Mokin, Ondo State , 1(1) , 69-74
Adeniran A. D., Okediji A. P., AlabI I.O., Alonge O.I., Fakinlede O.F., Obibi O.G. and Michael S.C. (2025). Development of a Dual Powered Kiln. Proceedings of the 1st International Conference of Faculty of Engineering and Environmental Sciences 2025, Elizade University Ilara-Mokin, Ondo State , 1(1) , 49-52
O. I. Alonge, A. P. Okediji, I. O. Alabi, A. D. Adeniran (2025). Development of an Open Hearth Furnace with a Mechanical Blower and Mechanized Bellow ABUAD Journal of Engineering Research and Development (AJERD) , Vol. 8 Issue 2 , 251-258 10.53982/ajerd.2025.0802.25-j
Alabi I. O., Famuagun G. C., Okediji A. P., Alonge O. I. and Oyefolahan A. O. (2025). Development of a Force Table Apparatus for Laboratory Use UNIZIK Journal of Engineering and Applied Sciences , 5(2) , 2579-2586
Okediji A. P., Alonge O. I. Alabi I. O., and Akinyemi J. J. (2025). Effects of Velocity and Battery Arrangement on Air-Cooled Lithium-ion Battery Thermal Management LAUTECH Journal of Engineering and Technology , 19(2) , 211-220 10.36108/laujet/5202.91.0222
Alabi I. O., Dare A. A. and Petinrin M. O. (2025). Influence of Penetration Angles on Global-Thermo-Hydraulic-Performance of Shell and Tube Heat Exchangers with Multi-Cross Sectional Tube Configurations LAUTECH Journal of Engineering and Technology , 19(1) , 15-26 10.36108/laujet/5202.91.0120
Ajibola, K.A, Olaiya, K.A., Alabi, I.O. (2024). Investigation of Thermal Properties and Ash Content of Sawdust-Reinforced Composite Brake Pads Journal of Scientific and Engineering Research , 11(7) , 221-228
Oluwasanmi Iyiola Alonge,Precious Ayomide Oreoluwa, Adebunmi Peter Okediji,Olusola Ayodele Oloruntoba, Ismaila Olanrewaju Alabi (2024). Characterization and Optimization of Carbonization of Flamboyant Tree Pod 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG), Omu-Aran, Nigeria , 2024 , 1-8 10.1109/SEB4SDG60871.2024.10629696
Alabi I. O., Dare A. A. and Petinrin M. O. (2024). Influence of Multi-Cross Sectional Tube Configurations on Thermo-Hydraulic Performance of Shell and Tube Heat Exchangers 2nd Faculty of Engineering and Technology International Conference (FETiCON 2024), University of Ilorin, Ilorin, Kwara State Nigeria. , 2nd , 595-605
Temitayo Samson Ogedengbe, Adekunle Ibrahim Musa, Abiodun Abideen Yussouff, Oluranti Adetunji Abiola, Ismaila Olanrewaju Alabi, Timothy Adewale Adeyi, Adekunle Akanni Adeleke, Akeem Gbenga Amuda (2023). Welding Processes and Common Defects: A Comprehensive Overview. 2023 2nd International Conference on Multidisciplinary Engineering and Applied Science (ICMEAS), Abuja, Nigeria , 2023 , 1-6 10.1109/ICMEAS58693.2023.10429906
(2023). Development of A Solar-Powered Slider-Crank Mechanism for Hand Pump in Rural Areas
(2023). Sustainable Manufacturing in Africa: The Pros and Cons- A Pragmatic Review
(2023). Morphology, Microstructure Evolution and Properties of Resin-Bonded Palm Kernel and Coconut Shell Grain-Based Abrasive Grinding Wheels
(2022). Morphology and Physico-Mechanical Properties of Resin-bonded Palm Kernel Shell and Coconut Shell Grain-based Sandpaper Composites
(2021). Development of Motorized Corn Thresher
(2020). Remotely Controlled Car Speed Governor
Olaiya K.A., Alabi I.O. and Okediji A.P. (2020). Performance Characteristics of a Single-Cylinder Two-Stroke Diesel Engine using Diesel-RK Software International Journal of Scientific & Engineering Research , , Volume 11, Issue 6 , 463-472.
T.S. Ogedengbe, A. P. Okediji, A. A. Yussouf, O. A. Aderoba, O. A. Abiola, I. O. Alabi and O. I. Alonge (2019). The Effects of Heat Generation on Cutting Tool and Machined Workpiece Journal of Physics: Conference Series , 1378 (2019) 022012 , 1-11 10.1088/1742-6596/1378/2/022012
Tolulope Opeyemi Olukokun, Adekunle Adefemi Adeyemi, Ismaila Olanrewaju Alabi, Mudasiru Ariyo Aderonmu and Mutiu Olalekan Kareem (2019). Development of an Indigenously Made Diesel Fired Crucible Furnace Proceedings of the 3rd International Conference of Energy Harvesting, Storage, and Transfer (EHST'19) Ottawa, Canada – June, 2019 , EHST 147 , 1-8 10.11159/ehst19.147
Alabi I.O., Okediji A.P., Owoo E.A. and Gerald C.N. (2019). Development of an Indigenously Made Diesel Injector Tester. World Journal of Engineering Research and Technology , 5(5) , 325-337.
Alabi I.O, Okediji A.P., Ogedengbe T.S., Ojotu, O. I. and Olukotun, T. O. (2019). Comparative Analysis of Selected Animal and Vegetable Oils Suitability in Machining of Plain Carbon Steels. International Journal of Engineering and Management Research , 9(2) , 152-161 https://doi.org/10.31033/ijemr.9.2.20
Olaiya, K.A., Alabi, I.O., Okediji, A.P. and Alonge, I.O. (2018). Parametric and Quantitative Analysis on the Development of Shell and Tube Heat Exchanger International Journal of Advanced Engineering, Management and Science , 4(6) , 451-459.
Olaiya, K.A., Alabi, I.O. and Falana, K.B. (2018). Numerical Simulation and Modeling of UNSA91060 for Heat Transfer in Four-Stroke ICE Cylinder Head International Journal of Advanced Engineering, Management and Science (IJAEMS) , Vol. 4, Issue 3. , 135-140
Kareem, M.O., Oluwasegun, K.M, Alabi, I.O. and Aderonmu, M.A. (2017). Effect of Precipitation Hardening on Mechanical Properties of Multi-Stage Stirred Cast AA6063 Composites’ Journal of Scientific and Engineering Research (JSAER) , 4(4) , 31-38
Aderonmu, M.A., Alabi, I.O., Kareem, M.O., and Falana, K.B. (2017). Experimental Investigation of Lard and Tallow oils Suitability in Turning Operation of Hypo-Eutectoid Steels Journal of Scientific and Engineering Research (JSAER) , 4(4) , 39-47
Adekunle Adegbola, Ghazali Akeem, Ismaila Alabi, Mutiu Kareem, Olugbenga Fashina, Abolade Olaniyan, Joseph Omotoyinbo, Oladayo Olaniran (2015). SIMULATION AND MODELING OF A CARBURIZING PROCESS USING VARIABLES FOR EFFECTIVE PERFORMANCE IN SERVICE IN AISI 1032 STEEL Processing and Properties of Advanced Ceramics and Composites VII: Ceramic Transactions , 252 , 405-415
Adekunle Adegbola, Julius Olapade, Ismaila Alabi, Akeem Ghazali, Emmanuel Ekundayo, Olugbenga Fashina, Mutiu Kareem, Abolade Olaniyan, David Oke (2014). DEVELOPMENT AND CHARACTERIZATION OF MODELING DEFORMATION OF AL-CU ALLOY Materials Science and Technology (MS&T) 2014 October 12-16, 2014, Pittsburgh, Pennsylvania, USA , 2024 , 1519-1526
ismaila.alabi@elizadeuniversity.edu.ng
08060849804; 08074485376